HyperTerminal windows 10 – Microsoft Community – Account Information

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Specifies the transmission speed for the connection. Here is a screenshot of how to configure these settings on a Cisco hyperterminal windows 10 PC running Hyper Terminal:. The values in this dialog box should be exactly as below. Details required :. This thread is locked.
 
 

Cisco hyperterminal windows 10

 

HyperTerminal is no longer available from Windows Vista onwards. Make sure that you have correct console connection to Cisco Router or Switch. Connect the other end to the Serial port of your computer. Refer the following link to know more about console port and console cable. Refer the following link if a Serial Port is not available in your computer. You can also type “hypertrm. The port number is COM4 in the below example.

The port number may be different in your computer. On many Cisco routers, you can enter Ctrl-C to interrupt the router startup process and then delete or change the admin password, or view or delete the router configuration. To prevent unauthorized access to the router configurations and passwords, the Ctrl-C command is disabled on the Cisco CGR Router while it is booting up and loading the system software.

To connect to the router console port using Microsoft Windows:. Configure the terminal emulation software with the parameters described in About the Console Port. Connect to the router. Open the Linux Terminal window. Connect the Linux USB port to the router. Enter the following commands to find the Linux USB port number:.

Skip to content Skip to search Skip to footer. Bias-Free Language. Bias-Free Language The documentation set for this product strives to use bias-free language. Find Matches in This Book. Log in to Save Content. PDF – Complete Book Updated: August 23, About the Console Port Caution: The console port does not support cable glands.

Data bits 8 Specifies the number of bits in an 8-bit byte that is used for data. Parity None Specifies the odd or even parity for error detection. Stop bits 1 Specifies the stop bits for an asynchronous line. Using the Ctrl-C Command The router console port is located on the router exterior and is accessible by removing the seal over the console port see Console Port.

 

Windows terminal software to connect to serial – Cisco Community

 

This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. How satisfied are you with this reply? If the default settings do not produce better results, it is possible that your router is configured to use nonstandard settings. In order to verify this, try to connect at different speeds until you get a valid prompt.

If none of the speeds is successful, your router can be in router hang state. To resolve the problem, refer to Troubleshooting Router Hangs. In order to capture the output of long show commands for example, from the show tech-support command or router debugs, you cannot simply use copy and paste. Instead, use the Capture Text option from your Hyperterminal as explained here:. Select Transfer from the menu bar on your Hyperterminal program, and choose the Capture Text option from the pull-down menu:.

Refer the following link if a Serial Port is not available in your computer. You can also type “hypertrm. The port number is COM4 in the below example. The port number may be different in your computer.

For more information on document conventions, refer to the Cisco Technical Tips Conventions. Garbage characters appear on the Hyper Terminal, and the router no longer accepts keystrokes. It appears as if the router is hanging and is not responsive.

The settings in the Hyper Terminal need to be set correctly; otherwise, “strange-looking” or garbage characters may show up on the screen. When you set up the connection, use these settings:.